Five Hundred 2WD V6-3.0L VIN 1 (2006)
Removal and Installation
1. Remove the steering wheel.
2. Remove the instrument cluster finish panel and the steering column upper shroud as an assembly.
^
Remove the 2 instrument cluster finish panel screws.
^
Press the sides of the upper steering column shroud inward to release it from the lower steering column shroud.
3. Remove the 3 lower steering column shroud screws and the lower shroud.
4. Disconnect the 3 electrical connectors.
5. Remove the 4 screws and the multifunction switch.
6. To install, reverse the removal procedure.
