Five Hundred 2WD V6-3.0L VIN 1 (2006)
3. Install the manual control lever.
4. Install the manual control lever nut.
^
Tighten to 12 Nm (9 ft. lbs.).
5. Connect the TCM electrical connector.
6. CAUTION: Be careful not to bend the manual control lever when installing the shift cable.
Connect the shift cable end.
7. Install the air cleaner assembly. For additional information, refer to Fuel Delivery and Air Induction.
8. Connect the battery ground cable. For additional information, refer to Battery.
9. Reflash the TCM module to the latest level calibration available.
10. Check for correct vehicle operation.
