Five Hundred 2WD V6-3.0L VIN 1 (2006)
8. Carefully lift the A/C condenser off the retaining clips and position the condenser aside.
9. Remove the screw for the cooler tube retainer.
^
To install, tighten to 10 Nm (89 inch lbs.).
10. CAUTION: Do not over compress the fluid clamps, damage to the clamps will result. The clamps on the end of the fluid cooler tubes are glued to
the tubes and are not to be removed. The clamps are part of the fluid tubes, removing the clamps from the ends will damage the fluid cooler tubes.
NOTE: If the clamps become damaged, install new fluid cooler tubes.
Disconnect the fluid cooler hoses from the fluid cooler.
