Five Hundred 2WD V6-3.0L VIN 1 (2006)
16. Pull the plunger to unlock the cable and remove the cable from the bracket.
All vehicles
17. Disconnect the selector lever cable from the brake tube bracket.
18. From inside of the vehicle, pull the selector lever cable through the bulkhead and remove from the vehicle.
Installation
All vehicles
1. Install the selector lever cable and install the 2 nuts.
^
Tighten to 7 Nm (62 inch lbs.).
2. Carefully pull the bottom of the instrument panel brace and slide the selector lever cable behind the brace.