Five Hundred 2WD V6-3.0L VIN 1 (2006)
11. Lift the fluid cooler off the retainers and remove the fluid cooler.
CVT transaxle
12. Remove the fluid fill plug.
^
To install, tighten to 35 Nm (26 ft. lbs.).
13. Partially fill the transaxle with clean automatic transmission fluid to make tip what was lost during the installation of a new transmission fluid
cooler.
^
Using the transmission fluid level setting (CVT) procedure, continue filling the transaxle.
6-speed transaxle
14. Remove the fluid fill plug.
