Five Hundred 2WD V6-3.0L VIN 1 (2006)
Connect the transaxle bulkhead electrical connector.
14. Fill the transaxle with approximately 4.7 L (5 quarts) of clean CVT automatic transmission fluid. Use the transmission fluid level setting
procedure to fill the transaxle.
15. If a new transaxle or a mechatronic main control valve body assembly is installed, the TCM will need to be reflashed to the latest level calibration
available. If the TCM is not reflashed, the wrench light on the dash may illuminate and internal transaxle damage may occur.
