Five Hundred AWD V6-3.0L VIN 1 (2005)
Keyless Entry Key-Pad: Service and Repair
Remote Keyless Entry Keypad Code Programming
REMOTE KEYLESS ENTRY KEYPAD CODE PROGRAMMING
NOTE:
-
The system only allows one personal code to be programmed.
-
Any existing personal code does not need to be erased to program a new code.
1. Enter the permanent factory remote keyless entry (RKE) keypad code.
2. Press the 1/2 button within 5 seconds to activate the programming mode. Holding the 1/2 button for more than 2 seconds after activation erases
the stored personal code.
3. Within 5 seconds, enter the new 5-digit RKE keypad code. The door locks lock and unlock to confirm the new code is programmed. Entering any
new personal code automatically erases the old personal code.