ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Parking Assist Distance Sensor > < Computers/Controls - Wrench Lamp ON/Possible DTC U0401|Page 8462
Page 2
background image

Removal and Installation

Sedan
1. Remove the package tray trim panel.

Wagon
2. Remove the LH C-pillar trim panel.

All vehicles
3. Disconnect the parking aid speaker electrical connector.
4. Disconnect the parking aid module electrical connector.
5. Remove the 2 pin-type retainers and the parking aid module.
6. To install, reverse the removal procedure.

Parking Assist Distance Sensor > < Computers/Controls - Wrench Lamp ON/Possible DTC U0401|Page 8462