ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Engine Controls - MIL ON/DTC's Set/Driveability Issues|Page 8652 > < Engine Controls - MIL ON/DTC's Set/Driveability Issues
Page 2
background image

5. Using Motorcraft(R) Choke and Linkage Cleaner or equivalent, spray the throttle body plate and bore. Using a small, soft, solvent resistant brush

clean the edges of the throttle plate and the mating surface of the throttle bore to remove all sludge build up. Reapply choke and linkage cleaner.
(Figures 1-2)

NOTE

DO NOT SPRAY CLEANER DIRECTLY INTO THROTTLE PLATE PIVOT SHAFT.

6. Install the throttle body. Refer to WSM 303-04.

7. Using IDS clear codes and reset keep alive memory (KAM).

Parts Block

WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage And Emissions Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.

OPERATION

DESCRIPTION

TIME

102405A

2005-2007 Five Hundred,

0.8 Hr.

Freestyle, Montego: Check
DTCs, Monitor PIDS, And
Clean The Throttle Body
Includes Time To Remove
And Install The Throttle

Engine Controls - MIL ON/DTC's Set/Driveability Issues|Page 8652 > < Engine Controls - MIL ON/DTC's Set/Driveability Issues