Five Hundred AWD V6-3.0L VIN 1 (2005)
Sunroof / Moonroof Motor: Service and Repair
Roof Opening Panel Motor
ROOF OPENING PANEL MOTOR
Removal and Installation
NOTE: The roof opening panel motor must be initialized when repairs are carried out on any part of the roof opening panel system, including:
whenever the roof opening panel motor has been removed from the roof opening panel system, the roof opening panel glass has been removed from the
roof opening panel system, the roof opening panel assembly has been removed from the vehicle, a new roof opening panel motor has been installed, a
new roof opening panel glass has been installed, or a new roof opening panel assembly has been installed. Refer to Roof Opening Panel Motor
Initialization. See: Roof Opening Panel Motor Initialization
1. NOTE: If possible, make sure that the roof opening panel glass is in the CLOSED position prior to the removal of the headliner.
Remove the headliner.
2. Remove the roof opening panel motor screws.
3. NOTE: When installing the roof opening panel motor, it may be necessary to turn the roof opening panel motor slightly to engage the drive
splines.
Remove the roof opening panel motor.
4. To install, reverse the removal procedure.
-
Initialize the roof opening panel motor.