Five Hundred AWD V6-3.0L VIN 1 (2005)
Wheel Speed Sensor: Service and Repair
Wheel Speed Sensor - Front
Wheel Speed Sensor - Front
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the wheel speed sensor electrical connector.
3. Remove the wheel speed sensor harness pin-type retainer.
4. Remove the 2 wheel speed sensor harness retainers.
5. Remove the bolt and the wheel speed sensor.
^
To install, tighten to 8 Nm (71 inch lbs.).
6. To install, reverse the removal procedure.
