Five Hundred AWD V6-3.0L VIN 1 (2005)
Brake Caliper: Service and Repair
Rear
Brake Caliper
Removal
1. Remove the brake pads.
2. Clean and inspect the disc brake caliper.
^
If leaks or damaged boots are found, install a new disc brake caliper.
3. Disconnect the brake line fitting from the brake flexible hose.
^
To install, tighten to 17 Nm (13 ft. lbs.).
4. NOTE: The brake caliper and brake flexible hose are removed as an assembly.
Remove the retainer clip from the brake flexible hose.
5. To install, reverse the removal procedure.
^
Bleed the caliper.
