Five Hundred AWD V6-3.0L VIN 1 (2005)
Vacuum Brake Booster: Service and Repair
Brake Booster
Removal and Installation
1. Remove the brake master cylinder.
2. Disconnect the brake booster vacuum fitting and position aside.
3. Remove the redundant self-locking pin cover and the self-locking pin.
^
Remove the booster rod and washer from the brake pedal.
4. Remove and discard the 4 nuts and the brake booster.
^
To install, tighten to 25 Nm (18 ft. lbs.).
5. To install, reverse the removal procedure.
