Five Hundred AWD V6-3.0L VIN 1 (2005)
Camshaft: Service and Repair
General Procedures
Camshaft Journal Diameter
1. Measure each camshaft journal diameter in 2 directions.
^
If out of specification, install new components as necessary.
Camshaft End Play - OHC Engines
Special Tools And Equipment
Special Tools
1. Use a Dial Indicator Gauge with Holding Fixture to measure camshaft end play.
2. Position the camshaft to the rear of the cylinder head.
3. Zero the indicator.
4. Move the camshaft to the front of the cylinder head. Note and record the camshaft end play.
^
If camshaft end play exceeds specifications, install new camshaft and recheck end play.
^
If camshaft end play exceeds specification after camshaft installation, install a new cylinder head.
Camshaft Surface Inspection
