Five Hundred AWD V6-3.0L VIN 1 (2005)
Loosen the LH camshaft bolts evenly in the sequence shown to allow the camshafts to rise from the cylinder head and remove the camshaft bearing
and thrust caps.
6. Remove the camshafts from the LH cylinder head.
Installation
1. Lubricate the camshafts with clean engine oil and carefully position the camshafts into the cylinder head.
^
Align the camshafts as shown.
2. CAUTION: Do not install the camshaft journal thrust caps until all of the camshaft bearing caps have been installed, or damage to the thrust caps
may occur.