Five Hundred AWD V6-3.0L VIN 1 (2005)
Crankshaft: Service and Repair
Crankshaft End Play
Special Tools And Equipment
Special Tool(s)
1. Measure the crankshaft end play. Use a Dial Indicator Gauge with Holding Fixture to measure crankshaft end play.
2. Position the crankshaft to the rear of the cylinder block.
3. Zero the indicator.
4. Move the crankshaft to the front of the cylinder block. Note and record the crankshaft end play.
^
If crankshaft end play exceeds specifications, install a new crankshaft thrust washer or crankshaft thrust main bearing.
