ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Auxiliary Temperature Blend Door Actuator|Page 7645 > < Auxiliary Temperature Blend Door Actuator|Page 7643
Page 1
background image

Air Door Actuator / Motor: Service and Repair
Mode Door Actuator

Air Inlet Door

MODE DOOR ACTUATOR - AIR INLET DOOR

Removal and Installation

1. Lower the glove compartment.
2. Disconnect the air inlet mode door actuator electrical connector.
3. Remove the air inlet mode door actuator.
4. To install, reverse the removal procedure.

Defrost/Panel/Floor Door

MODE DOOR ACTUATOR - DEFROST/PANEL/FLOOR DOOR

Removal and Installation

NOTE:  The defrost/panel/floor mode door actuator can be accessed from below the LH side of the instrument panel.

1. Remove the 3 defrost/panel/floor mode door actuator screws.
2. Disconnect the defrost/panel/floor mode door actuator electrical connector.

Auxiliary Temperature Blend Door Actuator|Page 7645 > < Auxiliary Temperature Blend Door Actuator|Page 7643