Five Hundred AWD V6-3.0L VIN 1 (2005)
13. NOTE: Label the driver air bag module squib number on the driver air bag module electrical connectors before disconnecting.
Release the two retaining tabs on each driver air bag module electrical connector and disconnect both connectors.
14. Disconnect the horn and accessories electrical connectors and remove the driver air bag module.
15. Attach the restraint system diagnostic tools to the clockspring electrical connectors at the top of the steering column.
16. Open and glove compartment door.
17. Release the dampening strut from the LH side of glove compartment door and lower door fully.
18. NOTE:
-
Freestyle shown, Five Hundred and Montego similar.
-
RH side electrical connector shown, LH is similar.
Through the glove compartment opening, disconnect the 2 passenger air bag module electrical connectors.
