Five Hundred AWD V6-3.0L VIN 1 (2005)
Alignment: Service and Repair
Camber Adjustment-Front
Camber Adjustment-Front
NOTE: Before carrying out a camber adjustment, check the tires for the correct pressure. Inspect the tires for incorrect wear or damage. Inspect the
front suspension components for wear or damage.
1. Raise and support the vehicle on hoist.
2. Remove the strut mount nuts.
3. CAUTION: Do not rotate the strut mount to any other position than 180° from its original position; the arrow (located on top of the strut mount)
must either point to the 3 o'clock or the 9 o'clock position.
Push the strut mount downward and rotate it 180 degrees. When rotated 180° from the original position, camber changes by +0.5°.
