Five Hundred AWD V6-3.0L VIN 1 (2005)
7. CAUTION: Make sure the fluid cooler tubes are installed straight or the tubes will be damaged.
Connect the transmission fluid cooler tubes to the pressure filter cover.
^
Tighten to 10 Nm (89 inch lbs.).
Fluid pan and filter
8. CAUTION: Make sure that the fluid filter pickup tube seal was removed from the bore when the filter was removed. Failure to remove the seal
prior to installing the new filter will result in transaxle failure.
CAUTION: Make sure that the transmission fluid filter is fully seated into the bore. If the filter is not correctly installed, internal transaxle
damage will occur.
Install a new fluid filter and seal assembly.
9. Make sure that the filter is seated over one of the mechatronic bolts.