Five Hundred AWD V6-3.0L VIN 1 (2005)
Ignition Coil: Service and Repair
IGNITION COIL-ON-PLUG
Exploded View
Removal and Installation
RH ignition coils
1. Remove the upper intake manifold.
All ignition coils
2. Disconnect the ignition coil electrical connectors.
3. Remove the ignition coil bolts.
-
To install, tighten to 6 Nm (53 lb-in).
4. NOTE: When removing the ignition coils, a slight twisting motion will break the seal and ease removal.
Remove the ignition coils.
5. To install, reverse the removal procedure.
-
Apply a light film of Silicone Brake Caliper Grease and Dielectric compound XG-3-A or equivalent meeting Ford specifications
ESE-M1C171-A to the inside of the coil boots before installation.