ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Relays and Modules - CVT > < Neutral Position Learning|Page 5227
Page 3
background image

4. Install the manual control lever nut.

^

Tighten to 12 Nm (9 ft. lbs.).

5. Connect the TCM electrical connector.

6. CAUTION:  Be careful not to bend the manual control lever when installing the shift cable.

Connect the shift cable end.

7. Install the air cleaner assembly. 
8. Connect the battery ground cable. 
9. Check for correct vehicle operation.

Relays and Modules - CVT > < Neutral Position Learning|Page 5227