ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Seat Belt Control Module > < Restraints - Control Module DTCs & Associated Fault PIDs|Page 1207
Page 4
background image

5. Connect the large RCM electrical wiring connector.

-

Using the connector position assurance lever, pivot it toward the RCM, drawing the connector into the RCM.
-

Make sure the thumb tab is engaged to the retainer on the RCM and locked in place.

6. Connect the small RCM electrical connector.
7. Install the center console.
8. Repower the system.

Seat Belt Control Module > < Restraints - Control Module DTCs & Associated Fault PIDs|Page 1207