Five Hundred AWD V6-3.0L VIN 1 (2005)
9. Release the horn and using a suitable tool, lift the end of the wire clip over the post.
10. Release the other side of the driver air bag module wire clip.
-
While actuating the horn at the lower part of the air bag cover, use a suitable tool to release the other side of the wire clip until it touches the
center post.
11. Release the horn and with a suitable tool, lift the end of the wire clip over the post causing both ends of the wire clip to overlap.
12. NOTE: When the driver air bag module wire clip is released correctly, the wire clip will easily slide into place and the 2 wire clip hook ends will
come to rest between the 2 inner posts.
With the wire clip ends in the overlapped position, actuate the horn at the upper part of the air bag cover, then push on both ends of the wire clip
inward (toward the center of the steering wheel) to release the driver air bag module from the steering wheel.
