ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Air Bag Resistor|Diagrams|Page 8061 > < Air Bag Resistor|Diagrams|Page 8059
Page 1
background image

Air Bag Resistor: Service and Repair

SAFETY CANOPY BRIDGE RESISTOR

Removal and Installation

WARNING:

-

Always wear safety glasses when repairing an air bag supplemental restraint system (SRS) vehicle and when handling an air bag module.
This will reduce the risk of injury in the event of an accidental deployment.

-

To reduce the risk of personal injury, do not use any memory saver devices.

NOTE:

-

The air bag warning lamp illuminates when the RCM fuse is removed and the ignition switch is ON. This is normal operation and does not indicate
a supplemental restraint system (SRS) fault.

-

The SRS must be fully operational and free of faults before releasing the vehicle to the customer.

-

Repair is made by installing a new part only. If the new part does not correct the condition, install the original part and carry out the diagnostic
procedure again.

1. Depower the system.
2. Remove the C-pillar trim panels.

Air Bag Resistor|Diagrams|Page 8061 > < Air Bag Resistor|Diagrams|Page 8059