Five Hundred AWD V6-3.0L VIN 1 (2005)
22. NOTE:
-
Seat backrest trim cover and foam are removed for clarity.
-
Note the routing of the side air bag module wiring for installation.
Release the side air bag module wire routing clips.
23. Remove the 2 nuts and the side air bag module.
Installation
WARNING:
-
Inspect the mounting surfaces of the side air bag module and the seat back frame mounting bracket for any foreign objects before
installing the side air bag module. If any foreign objects are found, remove them. Failure to do so may result in personal injury, in the
event of an air bag deployment.
-
Before installing the side air bag module, check it for damage and foreign objects. If the air bag module is damaged, replace it. If any
foreign objects are found, remove them. Failure to do so may result in personal injury, in the event of an air bag deployment.
-
If the air bag cover has separated or the air bag material has been exposed, install a new side air bag module. Do not attempt to repair
the air bag module. Failure to do so may result in personal injury in the event of an air bag deployment.
CAUTION: Make sure the side air bag module wiring harness is not pinched between the side air bag module and the backrest frame.
All seats
1. Install the side air bag module and nuts onto the seat backrest frame.
-
To install, tighten to 10 Nm (89 lb-in).
