Five Hundred AWD V6-3.0L VIN 1 (2005)
5. Use a hammer to lightly tap the installation tool provided in the D-Ring Installation Kit several times to seat the insert keys.
6. NOTE: If the shoulder safety belt shoulder height adjuster bolts are stripped, install a new height adjuster.
Insert the shoulder safety belt height adjuster in the opening of the upper B-pillar structure, making sure the shoulder belt height adjuster knob on
the shoulder safety belt height adjuster is positioned above the D-ring attachment nut. (The tab is located at the top and is to be inserted in the hole
provided in the B-pillar structure.)
7. Install the 2 shoulder safety belt height adjuster bolts.
-
Tighten to 40 Nm (30 lb-ft).
8. NOTE: Make sure the D-ring rotates freely. Install the safety belt D-ring nut.
-
Tighten to 40 Nm (30 lb-ft).
