Five Hundred AWD V6-3.0L VIN 1 (2005)
Alignment: Service and Repair
Front Toe Adjustment
Front Toe Adjustment
1. Start the engine and center the steering wheel.
2. Turn the engine OFF, and hold the steering wheel in the straight forward position by attaching a rigid link from the steering wheel to the seat.
3. Remove the steering gear bellows clamps.
4. Loosen the nuts.
^
Clean and lubricate the nuts and the tie-rod threads.
5. NOTE: Do not allow the steering gear bellows to twist when the tie-rod is rotated.
Rotate the tie-rods as necessary to adjust the toe setting.
6. Tighten the nuts to 115 Nm (85 ft. lbs.).
7. Install the steering gear bellows clamps.
8. Recheck the toe settings. Follow the alignment equipment manufacturer's instructions.
