Five Hundred AWD V6-3.0L VIN 1 (2005)
Power Steering Pump: Service and Repair
Power Steering Pump Pulley
Power Steering Pump Pulley
Special Tool(s)
Removal
1. Disconnect the windshield washer motor electrical connector.
2. Remove the 2 bolts and position aside the degas bottle.
^
Disconnect the fill sensor electrical connector.
3. Release the 2 retainers and position aside the engine w1ring harness.
^
Disconnect the 4 electrical connectors.
4. Remove the engine accessory drive belt.
5. Using the special tool, remove the power steering pump pulley.
Installation
