ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Air Bag Disarming and Arming|Page 7377 > < Air Bag Disarming and Arming|Page 7375
Page 9
background image

36. Attach the restraint system diagnostic tool to the vehicle harness side of the passenger side safety canopy module electrical connector.

All vehicles
37. Install the RCM fuse F2.21 (7.5A) to the SJB.
38. Connect the battery ground cable.

Reactivation

All vehicles
1. Remove the RCM fuse F2.21 (7.5A) from the SJB.
2. Disconnect the battery ground cable and wait at least one minute.

Five Hundred and Montego with safety canopy modules

3. Remove the restraint system diagnostic tool from the vehicle harness side of the passenger side safety canopy module electrical connector.

4. Connect the passenger side safety canopy module electrical connector.

Air Bag Disarming and Arming|Page 7377 > < Air Bag Disarming and Arming|Page 7375