Five Hundred AWD V6-3.0L VIN 1 (2005)
9. CAUTION: Do not allow the halfshaft to move outboard. Overextension of the tripod CV joint can result in separation of internal parts, causing
failure of the halfshaft.
Using the special tool, press the halfshaft from the wheel bearing and hub. Support the halfshaft in a level position.
10. Remove and discard the wheel knuckle-to-strut and spring assembly nut and flagbolt.
^
To install, tighten to 175 Nm (129 ft. lbs.).
11. Remove the wheel knuckle.
^
If necessary, remove the wheel hub and bearing.
12. To install, reverse the removal procedure.
^
Use new wheel knuckle fasteners.