ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

All Technical Service Bulletins for Control Module:|05-11-8 > < Computers/Controls - Wrench Lamp ON/Possible DTC U0401|Page 5615
Page 1
background image

Control Module: All Technical Service Bulletins
Engine, A/T Controls - Highway Speed Engine Fluctuation

TSB 05-17-5

09/05/05

ENGINE RPM FLUCTUATION AT HIGHWAY CRUISING 
SPEEDS - VEHICLES BUILT PRIOR TO 8/2/2005

FORD:
2005-2006 Five Hundred, Freestyle

MERCURY:
2005-2006 Montego

ISSUE
Some 2005-2006 Freestyle, Five Hundred and Montego vehicles built prior to 8/2/2005 and equipped with the continuous variable transaxle (CVI), may
exhibit a 50-100 RPM fluctuation. There will be no diagnostic trouble codes (DTCs). The condition will occur at highway speeds, during a steady state
cruise or slight tip-in, with transmission fluid temperature below 185° F (85° C).

ACTION
Reprogram the powertrain control module (PCM) and the transmission control module (TCM) to the latest calibration using WDS release B38.10 and
higher or B39.1 and higher. This new calibration is not included in the B39 CD. Calibration files may also be obtained at the website.

WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage

OPERATION

DESCRIPTION

TIME

051705A

2005-2006 Freestyle/Five

0.6 Hr.

Hundred/Montego:
Reprogram Powertrain
Control Module (PCM) And
Transmission Control
Module (TCM) (Do Not
Use With 12650D,
12650D84)

DEALER CODING

CONDITION

BASIC PART NO.

CODE

RECAL

04

Disclaimer

All Technical Service Bulletins for Control Module:|05-11-8 > < Computers/Controls - Wrench Lamp ON/Possible DTC U0401|Page 5615