ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 5825 > < Initial Inspection and Diagnostic Overview|Page 5823
Page 5
background image

9. Remove the screw for the cooler tube retainer.

^

To install, tighten to 10 Nm (89 inch lbs.).

10. Disconnect the fluid cooler hoses from the fluid cooler.

11. Lift the fluid cooler off the retainers and remove the fluid cooler.

CVT transaxle 

Initial Inspection and Diagnostic Overview|Page 5825 > < Initial Inspection and Diagnostic Overview|Page 5823