Five Hundred AWD V6-3.0L VIN 1 (2005)
4. Using the special tool, install the outer differential fluid seal.
5. Position the PTU and the rear driveshaft in place and install the 4 bolts.
^
Tighten to 90 Nm (66 ft. lbs.).
6. Install the upper PTU bracket and bolts.
^
Tighten to 55 Nm (41 ft. lbs.).
7. Install 2 new bolts and connect the rubber hanger for the catalytic converter.
^
Tighten to 40 Nm (30 ft. lbs.).
