Five Hundred AWD V6-3.0L VIN 1 (2005)
Installation
1. CAUTION: The OSS sensor has a spacer under the sensor for the bolt. This is used for keeping a specific distance from the differential gears.
Install the OSS sensor spacer sensor and bolt.
^
Tighten to 8 Nm (71 inch lbs.).
2. Connect the electrical connectors.
3. CAUTION: Make sure that the fluid filter pickup tube seal was removed from the bore when the filter was removed. Failure to remove the seal
prior to installing the new filter will result in transaxle failure.
CAUTION: Make sure that the transmission fluid filter is fully seated into the bore. If the filter is not correctly installed, internal transaxle
damage will occur.
Install a new fluid filter.
