Five Hundred AWD V6-3.0L VIN 1 (2005)
Shift Cable: Service and Repair
Selector Lever Cable
Removal
All vehicles
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the air cleaner and the outlet pipe.
3. Remove the center console.
4. Disconnect the selector lever cable end from the selector lever.
5. Depress the tab on the selector lever cable and lift up on the shift cable to remove it from the housing.
6. Pull the carpet and the insulation back to access the cable retainer and rubber Grommet.
7. Remove the 2 bolts for the instrument panel brace.