Five Hundred AWD V6-3.0L VIN 1 (2005)
7. Cut the urethane adhesive applicator tip to specification.
8. Apply a bead of Urethane Adhesive Essex 400-HV meeting Ford specification WSB-M2G316-B to the pinch weld.
9. NOTE: Before the urethane has set, partially lower the windows to prevent the glass from being pushed out of position when a door is closed.
Install the rear quarter window glass.
10. After the glass is set, check for water leaks and add urethane adhesive where needed.
11. Install the parcel shelf, C-pillar, and D-pillar trim panels.
