Flex AWD V6-3.5L (2009)
Cowl Moulding / Trim: Service and Repair
Cowl Panel Grille
Upper and lower cowl grille panel
1. NOTE: It is not necessary to remove the upper and lower cowl panel grille side mouldings to remove the cowl panel grille.
Remove the wiper pivot arms.
Upper cowl panel grille
2. Unsnap the LH and RH cowl panel grille side moulding from the cowl panel grille.
3. Disconnect the windshield washer hose connector.
4. Remove the 6 cowl panel grille pin-type retainers.
5. Remove the upper cowl panel grille.
Lower cowl panel
6. Remove the 2 outer cowl panel Tinnerman retainer clips (1 each side).
7. NOTE: It will be necessary to remove the lower RH cowl grille panel first.
Remove the RH lower cowl grille panel retainer.
8. Remove the RH lower cowl grille panel.
