Flex AWD V6-3.5L (2009)
Hood Latch: Service and Repair
Hood Latch
NOTE: Radiator grille shown removed for clarity.
Removal and Installation
1. NOTE: Mark the position of the hood latch prior to removing the hood latch bolts.
Remove the 2 bolts and position the hood latch aside to gain access to the hood latch release cable.
-
To install, tighten to 11 Nm (97 lb-in).
2. Disconnect the hood latch release cable and remove the hood latch.
3. To install, reverse the removal procedure.
-
When the hood latch is installed, the latch adjustment must be checked to make sure the latch is aligned correctly.