Flex AWD V6-3.5L (2009)
14. NOTE: Plug the rear wiper washer hose to avoid washer fluid leakage.
Disconnect the rear wiper washer hose.
15. Disconnect the front headliner electrical connector.
16. Remove the overhead console.
17. Disconnect the mirror electrical connector.
18. Lower the headliner.
19. Disconnect the 4 roof opening panel drain hoses from the corners of the roof opening panel frame.
20. NOTE: To avoid damage to the roof opening panel frame, be sure to support the roof opening panel frame when removing the roof opening panel
frame bolts.
Remove the 12 roof opening panel frame bolts.
-
To install, tighten to 6 Nm (53 lb-in).
21. Remove the roof opening panel frame.
22. To install, reverse the removal procedure.
-
If installing a new roof opening panel frame, transfer components as necessary.
-
Initialize the roof opening panel motor. For additional information, refer to Roof Opening Panel Motor Initialization See: Testing and
Inspection/Programming and Relearning.