Flex AWD V6-3.5L (2009)
Sunroof / Moonroof Panel: Service and Repair
Roof Opening Panel Shield
Roof Opening Panel Shield
Removal and Installation
1. Remove the roof opening panel glass. For additional information, refer to Roof Opening Panel Glass See: Roof Opening Panel Glass.
2. Slide the roof opening panel shield forward halfway.
3. Disengage the roof opening panel shield guide feet.
-
Lift the front portion of the roof opening panel shield upward at center until able to disengage one of the front guide feet.
4. With one of the guide feet released, carefully rotate the roof opening panel shield in a clockwise manner to disengage the remaining guide feet.
5. To install, reverse the removal procedure.
-
Initialize the roof opening panel motor. For additional information, refer to Roof Opening Panel Motor Initialization See: Testing and
Inspection/Programming and Relearning.