Flex AWD V6-3.5L (2009)
2. Remove the 2 head restraint guides sleeves. For additional information, refer to Head Restraint Guide Sleeve See: Head Rest/Service and Repair.
3. Remove the outboard upper recliner cover.
1. Pull at the front and release the clip.
2. Pivot the top of the outboard upper recliner cover back and remove.
-
Pull the fold-flat release strap out through the opening.
4. Separate the cables and wire harness from the outboard recliner.
-
Separate the fold-flat cable retainer and cover from the outboard recliner.
-
Separate the side air bag module wire harness pin-type retainer from the outboard recliner.
-
If equipped, separate the manual lumbar cable retainer from the outboard recliner.
