Flex AWD V6-3.5L (2009)
16. Route the wire harness out from under the seat.
17. Position the backrest trim cover aside and remove the 4 recliner-to-backrest frame bolts (2 shown).
-
Remove the backrest.
18. Invert the backrest trim cover up and remove the first row of hog rings.
19. Invert the backrest trim cover up to expose the side air bag module deployment chute.
-
Feed the fold-flat cable, (if equipped) lumbar cable and backrest wire harness through the side openings of the backrest trim cover.
20. Squeeze the ends of the deployment chute clips together and open the deployment chute.
21. Invert the backrest trim cover up and remove the second row of hog rings.
