Flex AWD V6-3.5L (2009)
2. NOTE: Driver seat track shown, passenger similar.
At the front of the seat track, disconnect the cushion heater mat electrical connector and separate the wire harness retainer.
3. Remove the cushion foam pad from the cushion frame. Discard the cushion foam pad with heater mat.
4. Obtain a new cushion foam pad with the cushion heater mat already adhered to the cushion foam pad.
-
Do not remove the old cushion heater mat from the old cushion foam pad and reuse any of these parts.
5. To install, reverse the removal procedure.