Flex AWD V6-3.5L (2009)
Removal
NOTE: The Supplemental Restraint System (SRS) must be fully operational and free of faults before releasing the vehicle to the customer.
1. WARNING: Turn the ignition OFF and wait one minute to deplete the backup power supply. Failure to follow this instruction may result
in serious personal injury or death in the event of an accidental deployment.
For passenger seat, turn the ignition OFF and wait at least one minute.
2. For driver seat, remove the manual recliner handle, if equipped.
1. Locate the clip between the seat cushion and side shield.
2. Remove the clip and slide the handle off the shaft.
3. For passenger seat, remove the manual recliner handle in the following sequence.
1. Pull the back flap out to access the recliner handle clip.
2. Locate the clip between the seat cushion and side shield.
3. Remove the clip and slide the handle off the shaft.
4. If equipped, remove the manual lumbar knob.
1. Locate the clip between the seat cushion and side shield.
2. Remove the clip and slide the knob off the shaft.
