Flex AWD V6-3.5L (2009)
85. Remove the 3 bolts and the accessory drive belt tensioner.
86. Loosen the 11 stud bolts and remove the LH valve cover.
-
Discard the gasket.
87. Loosen the bolt, the 10 stud bolts and remove the RH valve cover.
-
Discard the gasket.
88. NOTE: VCT solenoid seal removal shown, spark plug tube seal removal similar.
Inspect the VCT solenoid seals and the spark plug tube seals. Install new seals if damaged.
-
Using the VCT Spark Plug Tube Seal Remover and Handle, remove the seal(s).
89. Using the Strap Wrench, remove the crankshaft bolt and washer.
-
Discard the bolt.
