Flex AWD V6-3.5L (2009)
9. Remove the upper intake manifold support bracket bolt.
10. Remove the fuel tube bracket bolt from the upper intake manifold.
11.
NOTICE: If the engine is repaired or replaced because of upper engine failure, typically including valve or piston damage, check the
intake manifold for metal debris. If metal debris is found, install a new intake manifold. Failure to follow these instructions can result in
engine damage.
Remove the 6 bolts and the upper intake manifold.
-
Discard the gaskets.
12. Disconnect the Power Steering Pressure (PSP) switch electrical connector.
Front Wheel Drive (FWD) vehicles
13. Disconnect the RH Catalyst Monitor Sensor (CMS) electrical connector.
