Flex AWD V6-35L (2009) Engine Lubrication: Oil Pan Removal
21. Detach all of the wiring harness retainers from the LH valve cover and stud bolts.
22.
NOTE: LH shown, RH similar.
Remove the 6 bolts and the 6 coil-on-plugs.
23.
NOTE: The A/C compressor must remain bolted to the cylinder block prior to installing the oil pan.
Remove the A/C compressor nut and stud.
24. Remove the PSP tube bracket-to-power steering pump bolt.
25. Remove the nut and the PSP tube bracket from the RH valve cover stud bolt.
26. Remove the 3 bolts and position aside the power steering pump.
