Flex AWD V6-3.5L (2009)
Crankshaft Main Bearing Seal: Service and Repair
Crankshaft Rear Seal
Crankshaft Rear Seal
Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the flexplate. For additional information, refer to Flexplate See: Transmission and Drivetrain/Flex Plate/Service and Repair/Removal and
Replacement/Flexplate.
3. Remove the crankshaft sensor ring.
4. Using the Crankshaft Rear Oil Seal Remover and Slide Hammer, remove and discard the crankshaft rear seal.
-
Clean all sealing surfaces with metal surface prep.
