Flex AWD V6-3.5L (2009)
-
Measure the voltage between the trailer battery charge relay pin 85, circuit CBP33 (WH/BN), BJB face side and ground.
-
Is any voltage present?
Yes
GO to AD11.
No
INSTALL a new trailer battery charge relay. TEST the system for normal operation.
-------------------------------------------------
AD11 ISOLATE THE SHORT TO VOLTAGE
-
Disconnect: SJB C2280b.
-
Measure the voltage between the trailer battery charge relay pin 85, circuit CBP33 (WH/BN), BJB face side and ground.
-
Is any voltage present?
Yes
REPAIR circuit CBP33 (WH/BN) for a short to voltage. TEST the system for normal operation.
No
GO to AD12.
-------------------------------------------------
AD12 CHECK FOR CORRECT SJB OPERATION
-
Disconnect all the SJB connectors.
-
Check for:
-
corrosion
-
damaged pins
-
pushed-out pins
-
Connect all the SJB connectors and make sure they seat correctly.
-
Operate the system and verify the concern is still present.
-
Is the concern still present?
Yes
INSTALL a new SJB. TEST the system for normal operation.
No
The system is operating correctly at this time. The concern may have been caused by a loose or corroded connector.